A finger on the pulse of your assets.
Strix gives the owner, the CFO and the chief engineer a single real-time picture of the enterprise: revenue, downtime, risk — with no intermediaries and no retold reports.
A full Russian stack for predictive analytics and APC. From sensor to advisor. From signal to economics.
Strix · real dashboard Three views of one asset.
One pulse — three readings. The owner watches revenue, the CFO counts losses, the chief engineer makes the diagnosis. All three — in one system.
Revenue, downtime, risk — on your phone, with no intermediaries and no retold reports from the team.
Downtime in dollars, OEE as a financial metric, energy overconsumption. Equipment-as-a-Service: pay for the result, not the CAPEX.
Spectra, RUL, advisor. Full L0–L3 stack — the depth you expect from an industrial vendor.
Start collecting data in the next 30 minutes.
Strix Connect is our software-only OPC UA gateway. One binary, runs on any Linux box — your laptop, a VM, a spare server, a Pi in the cabinet. No PO, no shipping, no commissioning trip. Free for the first 100 tags, forever.
- OPC UA, Modbus TCP/RTU sources
- MQTT, Kafka, REST, OPC UA outputs
- Edge buffer survives connectivity loss
- ≤ 80 MB RAM, single binary
# pull and run
$ docker run -d \
-p 4840:4840 \
-v $PWD/lite.yml:/etc/limantech/lite.yml \
limantech/strix-connect:latest
# in lite.yml — point at your PLC
sources:
- name: pump-14
type: opcua
endpoint: opc.tcp://10.0.5.31:4840
nodes: ["ns=2;s=Vibration", "ns=2;s=Bearing"]
outputs:
- type: mqtt
broker: tcp://broker.local:1883
topic_prefix: factory/
✓ Strix Connect ready · 12 tags · streamingFrom signal to action, in one stack.
Most monitoring tools stop at dashboards. Liman-Tech closes the loop — from the bearing on the floor to the work order on the technician's tablet.
Passer acquisition controllers digitise vibration and motor current at lab-grade fidelity — 8 channels, up to 100 kHz — and stream raw waveforms straight to the edge.
Larus gateways aggregate sensor and PLC data, run edge inference and forward to your cloud, MES, SCADA or CMMS — software-only or hardware appliance.
Strix is the platform that ties it together — analytics, asset twin, computer vision, ranked work orders. Run it in our cloud, your server, or on a Larus appliance.
Software, gateways, sensors — pick your entry point.
Six SKUs across three families. Mix and match — start free, scale to a turnkey appliance.
A software-only OPC UA / Modbus gateway. Install on any Linux server in 30 minutes, stream tag data to MQTT, Kafka, REST or Strix. Free tier for up to 100 tags.
An 8-channel IEPE/ICP vibration data-acquisition controller. Up to 100 kHz per channel. Streams raw signals to a Larus gateway for FFT, envelope, ML inference and SCADA integration.
A multi-channel current acquisition controller for motor signature analysis (MCSA). Captures stator current and voltage at high resolution, streams to Larus for diagnostics — broken bars, eccentricity, bearing faults, load anomalies.
Industrial edge gateway. Ingests raw streams from Passer controllers, computes FFT, envelope, RMS/Peak/Crest factor and runs ML classifiers — then forwards results to your SCADA, MES, CMMS or Strix.
Larus-10 plus an Eclipse 4diac (IEC 61499) runtime for deterministic edge automation. Same diagnostics stack on Passer streams, plus the ability to act locally — interlocks, sequencing, skid-level control.
A turnkey edge appliance: Larus hardware with the full Strix platform preinstalled. Ship a single box that already runs computer vision, vibration diagnostics, asset twin and edge analytics.
The Liman-Tech software platform: data fabric, asset twin, analytics and apps for predictive maintenance, computer vision and edge automation. Runs in your cloud, your server, or on a Larus appliance.
LimanISU-Monitor (LISU) — the HMI tier of the platform: a dashboard for the owner, the CFO and the chief engineer. On server, workstations and smartphone. Listed in the Russian software registry (Mincifry №15057).
Built for heavy industry — not light machinery.
We focus where downtime is most expensive: rotating equipment in extraction, processing, and energy.
Read customer stories →Gold processing, comminution, flotation circuits.
Compressors, pumps, gearboxes on critical service.
Kilns, mills, fans, conveyors in dusty environments.
Auxiliary equipment in thermal and renewable plants.
News & resources
Full technical documentation — open access.
Hardware specs, integration guides, 4diac materials, developer references and Strix application docs. No signup, no lead capture — for the engineers on your maintenance team and your APCS integrators.
Install Liman-Tech on one machine.
Show ROI in 30 days.
Pick your most critical asset. We ship sensors, set up edge gateway, and deliver a baseline + first insight within four weeks. No platform commitment.
- Sensors and gateway shipped within 7 days
- On-site or remote commissioning
- Reliability report at the end of the pilot